TDK NTC sensor element designed for measuring temp up to 650C
Latest from TDK-Epcos is a new negative temperature coefficientThe change in capacitanceThat property of a system of conductors and dielectrics which permits the storage of electricity when potential difference exists between the conductors. Its value is expressed as the ratio of a quantity of electricity to a potential difference. A capacitance value is always positive. with temperature expressed linearly as parts per million per degree centigrade (PPM/°C), or as a percent change over a specified temperature range. Most film capacitors are not linear and TC is expressed in percent. NTC sensor element designed for measuring temperatures up to 650C.The device is based on a high-temperature ceramic sensor element connected to a metallized aluminium oxide rod and then glass-encapsulated.
The sensor element offers high-precision measurement with a temperature tolerance of c. ±1K at 200C. The component obtains its particular ruggedness from the glass encapsulation. It is available optionally with wires welded to the aluminium-oxide rod. The component is 16mm long and the glass encapsulation has a diameter of 2mm.The high-temperature sensor is qualified to AEC-Q200 and designed for use in especially demanding automotive electronics applications, for example, in exhaust gas recirculation systems. These are used mainly on diesel engines to reduce excess oxygen in the combustion gas and thereby minimize the formation of nitrogen oxides at high combustion temperatures. In the recirculation systems the NTC sensors measure the temperature of the exhaust gas and thus help to protect the engine against overheating – in particular, the cylinder head and valve seats.In e-mobility applications the new sensors are able to monitor the temperature of fuel cells that are used in electric vehicle drive systems for the direct generation of electrical energy from hydrogen. Applications can also be found in household appliances, for example in self-cleaning ovens that operate on the pyrolytic principle. These work by heating the oven interior to a temperature of around 500C which breaks down the long-chain molecules of the food residues and reduces them largely to gas and ash. The necessary temperature is regulated and stabilized by the NTC sensors, says the company.